Mesh Side Rail Pads for Extended Bed Rails - Pair

Fitting

• Before the pads are fitted a risk assessment must be performed on a patient by patient basis to ensure suitability (including but not limited to: risk of entrapment, asphyxiation, insecure fitting and non-compatibility).

• Side rails pose a potential entrapment hazard, refer to side rail safety notice, SR/PSN 01/01/1, supplied with the bed.
• Ensure the Velcro fastenings are located to the outside of the bed away from the bed occupant. Ensure the Velcro fastenings are fastened along the entire length of the side rail.
• The side rail pads may be removed for additional ease of raising or lowering the side rails bars if desired.

Cleaning

• Wipe down with a disposable cleaning cloth, moistened with a mild detergent and diluted in hot water (60°C). Extra care should be taken around areas where excess dirt or dust may gather. Rinse down with clean water and dry off with a paper towel. Always ensure that the pad is dry before re-using.
• It is not recommended to use any bleach or surface cleaner that may mark the surface.
• DO ensure the side rail pads are cleaned on a regular basis

Note: Although the Mesh Side Rail Pad is designed for use with Sidhil Bradshaw & Freedom II beds, subject to assessment of suitability it may be possible to use the product with other bed and side rail combinations.