• New innovative technology provides a detergent and rinse aid all in one product
• Ensures quick drying
• Cuts through grease and dried-on food
• Highly concentrated formulation gives economy in use
• Prevents scaling of the dish wash machine
• Gives streak and spot-free results
• Chlorine free
• Phosphate free
• NTA free
• Soft metal safe
Suma Combi+ Alu LA10 is normally applied using Diversey automatic dispensing equipment. However, it can be used in conjunction with an integral dosing pump. To ensure perfect cleaning results in up 12°dH, 21°fH or 215ppm water hardness conditions, use the minimum recommended dosing of 1,0ml/l*. At 2,0ml/l, this will prevent scale deposits in water containing up to 135ppm CaCO3. Actual dosage will depend on site conditions (water hardness, degree of soiling, procedures). The product is not suitable for systems where currently an acidic rinse aid is used as a descaler, and where a detergent to rinse aid dosage is below 2:1. At first use, rinse pump and transport tubes of the dosing system to avoid possible crystallisation in the tubes caused by mixing of products, and empty the rinse line.
Technical data Appearance: clear yellow liquid pH (1% solution at 20°C): 12,3 Relative density (20°C): 1,25 The above data is typical of normal production and should not be taken as a specification.
Safe handling and storage information Full guidance on the handling and disposal of this product is provided in a separate Safety Data Sheet; sds.diversey.com.
Store in original closed containers away from extremes of temperature.
Only for professional users / specialists.
Product compatibility Under recommended conditions of use, Suma Combi+ Alu LA10 is suitable for use on most materials commonly encountered in the kitchen.